Wallys||industrial wifi5/wifi6 router/Outdoor AP Support IPQ6018 IPQ4019 IPQ4029 802.11ax/ac

wallys

Wallys||industrial wifi5/wifi6 router/Outdoor AP Support IPQ6018 IPQ4019 IPQ4029 802.11ax/ac QCN9074/QCN9024

Today I would like to introduce wallys outdoor AP.

This AP can use wallys IPQ4019/IPQ4029/IPQ6010 chip motherboard, with some related industrial wifi moudle, antenna, etc.

Let's take a look at the components of the product.

The first is the motherboard DR40X9(Quaclomm IPQ4019/IPQ4029),DR6018-S(Quaclomm IPQ6010/IPQ6018).

DR40x9, which has two chips available, but the most common is IPQ4019.

The differences are:

Compared with IPQ4019, IPQ4029 has 5M and 10M more.

DR40x9 is the wifi5 product of wallys. At present, many customers will choose this router. Its performance can fully meet customers' project requirements, and its price is much cheaper than wifi6.

DR40x9, can use the mini pcie moudle.

At the same time, DR40x9Wallys has also been tested. With wifi6 moudle of our （MTK MT7915+MT7975 chipset）
, it can support 2.4G and 5G at the same time. At present, few suppliers can do this, so Wallys has great advantages.

DR6018-s is an industrial wifi6 router. Different projects have different needs, so wifi6 products are also very important at present. It generally adopts Qualcomm IPQ6010 chip, and is combined with wifi6e moudle. wallys M.2 moudle has three models, respectively supporting 2.4G,5G,6G, can only support single frequency, if the customer wants dual frequency, then need to customize.

outdoor AP also contains flat plate antennas. The following is to introduce this antenna, which can also be customized.

DR5G17

802.11ac/802.11ax, panel antenna 5G 17dBi, mmcx connector.

Many customers have customized requirements for gain, which can be met.

The following picture is the introduction of all the general products of a router. If you have any requirements or questions about hardware and software, you can contact me at any time.

Wallys has a history of 10 years, so it can be said that its hardware and software development design is very mature. It independently designs and develops software to support the current trend of wifi, including openwrt, MT and QSDK, which has been recognized and trusted by more customers.

There are many companies in the market that develop and design wireless motherboards (moudle, antenna), but for some reasons, the design and development is complicated and the cost is high, so more companies are not willing to take on such customers, and wallys can help you complete the project, which is also an advantage.

For example, if you buy a board from another company and you need wallys' moudle, but the board may not be compatible with moudle, this problem is troublesome, and wallys can help the customer solve the problem to some extent.

More customers can get technical support, so as to obtain more customer sources. This is not only for helping customers, but also for wallys' strong hardware and software development ability to gain customers' trust and support.

wallys also supports custom development if the client has a custom product project.

More questions can be contacted by email, at any time for you to answer questions

Skype/EMAIL:[email protected]