德州仪器半导体制造（成都）有限公司招贤启示

TICD

    各位闯荡江湖的兄弟姐妹们，德州仪器成都厂（Fab 8寸）开始招聘了，如果你已期盼回国就业，就赶快行动吧！

如果您对以下职位感兴趣，请联系我们：[email protected]  

邮件主题注明：姓名+应聘职位+狮城论坛

本招聘是由德州仪器公司直接发布信息，非中介或第三方，请大家放心！

    招聘岗位：

    1。 Etch section manager 1名，要求本科学历，期望有Fab 10年设备经验，有相关的管理经验。

    2。 Yield Engineering (YE) manager 1名，要求本科学历，期望有Fab 6年及以上YE经验，有一定的管理经验。  

    2。 PIE 数名，主要从事研发工作，要求本科学历5年以上PIE相关工作经验。英语口语流利。

    3。Equipment Engineer 数名。要求本科学历，有Fab设备工作经验。

    4。工艺技术员（Process/PIE Technician) 数名。要求大专学历。

    以下为详细job description.

设备课经理（EE section manager）

Job Content:

Responsible for overseeing the maintenance of production equipment.

1. Maintains production equipment in a manner which meets company standards and ensures minimum equipment downtime.

2. Oversees technicians that repair and maintain the production and test equipment.

3. Establishes and maintains preventive maintenance programs and procedures.

4. Administers training programs to ensure proper operation, preventive maintenance and repair programs and procedures.

5. Maintains inventory or spare parts.

Responsible for scheduling activities.

1. Receives assignments in the form of objectives with goals and process to meet goals outlined.

2. Provides direction to employees according to established policies and management guidance.

3. Work is reviewed by management to measure meeting of objectives.  

4. Administers company policies that directly affect subordinate employees.

5. Recommends changes to unit or sub-unit policies.

6. Erroneous decisions or failure to achieve results will cause delays in schedules.

7. Frequently interacts with subordinate supervisors, outside customers and functional peer groups at management levels.

8. Interaction normally requires the ability to gain cooperation of others, conducting presentations of technical information concerning specific projects/schedules, etc.

9. Provides general supervision to lower level supervisors and direct supervision to exempt employees and/or skilled nonexempt employees (i.e., maintenance technicians).

Experience:

1. Bachelor degree or above, >10 years Equipment Engineer experience in Fab.

2. Familiar to PVD or Etch tools is perfect.

良率课经理（Yield Engineering manager）

Job Content

1.Receives assignments in the form of objectives with goals and process to meet goals outlined.

2. Provides direction to employees according to established policies and management guidance.

3. Work is reviewed by management to measure meeting of objectives. Administers company policies that directly affect subordinate employees.

4.Recommends changes to unit or sub-unit policies.

5.Erroneous decisions or failure to achieve results will cause delays in schedules.

6.Frequently interacts with subordinate supervisors, outside customers and functional peer groups at management levels.

7. Interaction normally requires the ability to gain cooperation of others, conducting presentations of technical information concerning specific projects/schedules, etc.

8.Provides general supervision to lower level supervisors and direct supervision to exempt employees and/or skilled nonexempt employees (i.e., engineering, technicians).

Requirement:
Bachelor's degree with at least 6 years working experience inYE engineering field.
Skills / Certifications:
1. Technology flaw analysis, problem-solving and process yield improvement.
2. Processing window and process ability inspection verification, inspection and investigation of potential design flaws,
product designs meet the technological requirements.
3. Defect inspection for new technology and a new formula. Design experiments to test and find new potential risk of defects
in the process, eventually bringing the technology to production requirements.
Desired Competencies:
YE system build up experience
Manager experience

工艺整合工程师（PIE Engineer）

Job Content
Primary Responsibilities: Work with engineering team to establish the technology including process requirements and release, short flow development work, product flows, product qualification and new device setup.
Complex Tasks: Identify risks resulting from integration strategy and work with engineering team to address them. Correlation of test results to process and yield data to identify areas that need to be addressed to resolve problems & get continuous improvement.

Experience:
1. Bachelor above degrees in Electrical Engineering, Physics, Materials science.
2. Minimum 3 years' experience in device analysis or process integration.
3. Exhibit good and open communication skills, be able to work within cross-functional teams

Skills / Certifications:
Fluent in English speaking & writing

Desired Competencies:
1.Solid technical understanding of IC processing equipment, integrated flow, chemistry and physics
2.Strong knowledge of Statistical Process Control (SPC) and/or Design of Experiments (DOE) principles
3.Flexibility in changing priorities and responsibilities to support business needs.
4.Hands-on participation and a strong sense of ownership.
5.Willingness to make frequent fab presence

设备工程师（EE）

Job Content:

1. Responsible for evaluating, selecting, and ordering equipment that is appropriate and cost effective for the manufacture of company products.

2. Oversees the installation, modification, upgrade and maintenance of manufacturing equipment.

3. Keeps current on equipment manufacturers' technical notices, upgrades and safety issues.

4. Studies equipment performance and reliability.

5. Establishes programs and solutions for increasing uptime and for equipment problems that affect the manufacturing process.

6. Provides technical support to the manufacturing equipment repair and process engineering organizations.

7. Defines and writes preventative maintenance schedules.

8. Follows standard practices and procedures in analyzing situations or data from which answers can be readily obtained.

Experience:

1. Bachelor degree

Skills / Certifications:

1. Excellent interpersonal skills.

2. Good time management/priority setting skills

工艺技术员：

Responsible for performing technical tests and experiments for process of R & D engineering in the wafer fabrication area of semiconductor manufacturers. Performs set-up of semiconductor processing equipment. Monitors, audits, and provides guidance to line operators. Processes test runs and prepares records, charts, and graphs of results through masking and diffusion for presentation to engineering to identify yield problems or test new products. Provides technical assistance to process development and engineering personnel.

Experience:
Minimum 1 year work experience in semiconductor factory.
Be experienced in hold lot handling like OCAP processing, SEM review.
FUR or IMP, WET, PVD, CVD, CMP process work experience is preferred.

Skills / Certifications:
Demonstrated ability to solve issues effectively and efficiently;
Ability to work effectively on a team; self-directed and motivated; strong interpersonal skills.

Desired Competencies:
Flexibility and Adaptability
Execution
Initiative

TICD

同志们，上啊！
过了这个村，就没这个店了